12792
22
Zoom out
Zoom in
Previous page
1/40
Next page
18
6
MEMORY/CALL PROGRAMMING
General
The transceiver has 124 memory channels (100 regular, 10
pairs of scan edge channels for mixed bands and 1 call chan-
nel for each bandVHF, UHF, 50 MHz and 1200 MHz). Note
that memory channels are not grouped according to band. In
other words, a given memory channel can be programmed
with either a VHF frequency, a UHF frequency, a 50 MHz fre-
quency or a 1200 MHz frequency. This is not the case with
call channels. Call channels are band specic.
The following can be programmed into memory/call channels:
Operating frequency
Duplex direction with an offset frequency (p. 16)
Subaudible tone encoder or tone squelch on/off with a tone
(CTCSS) frequency (pgs. 16, 25)
ModeAM, FM, etc. (p. 14)
Skip information* (p. 23)
*Except for scan edge memory channels and call channels.
NOTE:
Memory channels can be assigned names (of up to 6
characters).
When memory names are assigned, each push of [MR]
toggles between frequency and name indication.
Programming a memory
channel
Push [VFO] to select VFO mode.
Set the desired frequency:
Set other data, such as repeater
information, if required.
Push [(MR)MW] for 1 sec.
•“X and the previously selected
memory channel ash.
Push [MULTI()] (or rotate [DIAL])
to select the desired memory chan-
nel.
Call channels and scan edge
channels, as well as regular chan-
nels, can be programmed in this
way.
Only the decimal point appears
for memories not yet pro-
grammed.
If you want to conrm the VFO frequency, push [MR] mo-
mentarilythe VFO frequency briey appears.
Push [(MR)MW] for 1 sec. to program.
•“
X and the memory channel number stop ashing.
VFO mode is selected.
DUP
LOW
MR
MR
DUP
LOW
IC-T81A/E Manual-(1) 01.12.5 6:55 PM Page 18 (1,1)
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-T81A E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-T81A E in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info