12790
20
Zoom out
Zoom in
Previous page
1/36
Next page
4
ADVANCED FUNCTIONS
16
D Programming after selection
Select the memory channel to be programmed:
Push [MR] to select memory mode.
Rotate [DIAL] (or use the keypad) to select the memory
channel.
Non-programmed channels cannot be selected.
Set the desired frequency in VFO mode:
Push [VFO] to select VFO mode.
Set the desired frequency using the keypad or [DIAL].
Set other data, if desired.
Push [S.MW] for 1 sec. to program.
D Memory/call VFO
Select the memory/call
channel to be transferred:
Push [MR] (or [CALL])
to select memory (call)
mode.
Rotate [DIAL] (or use
the keypad) to select the
memory channel.
Push [S.MW] for 1 sec. to
transfer to VFO.
D Memory/call call/memory
Select the memory/call channel to be transferred:
Push [MR] (or [CALL]) to select memory (call) mode.
Rotate [DIAL] (or use the keypad) to select the memory
channel.
Push [S.MW] momentarily.
A beep sounds, VF appears and X ashes.
Do not hold [S.MW] for more than 1 sec., otherwise the memory
channel will overwrite the VFO.
Rotate [DIAL] to select a memory or call channel to transfer
the data.
Push [S.MW] for 1 sec. to program.
•“X stops ashing.
D Memory clear
Push [S.MW] momentarily.
Select the memory channel to be cleared with [DIAL].
Push [S.MW] briey, then a second time for 1 sec.
3 beeps sound, then the frequency is cleared.
•“X ashes continuously.
Scan edges 1A and 1B and call channels cannot be cleared.
Push [(VFO)CLR] to stop the ashing.
NOTE: Be careful the contents of cleared memories
CANNOT be recalled.
DUP
DUP
VFO mode selected
for
1 sec.
Memory mode
MW
S.MW
D
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-T7H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-T7H in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info