12784
41
Zoom out
Zoom in
Previous page
1/48
Next page
37
13
TROUBLESHOOTING
If your transceiver seems to be malfunctioning, please check
the following points before sending it to a service center.
PROBLEM
No power comes on.
Transmitting is impossible.
Frequency cannot be set.
Scan does not function.
[Y] or [Z] keys do not
function when using the
optional HM-75A.
Squelch does not open for
received signals.
Some memory channels
cannot be selected.
ANI mode cannot be ac-
cessed.
Some functions are not
available.
POSSIBLE CAUSE
The battery is exhausted.
(A slight current flows in the circuits even when the
power is off.)
The battery is exhausted.
Memory mode, call channel or channel indication
mode is selected.
The lock function is activated.
The same frequencies are programmed into both
scan edges.
Only CH1 is programmed; or, all other memory
channels are set as skip channels.
Memory channels 1 and/or 2 are not pro-
grammed and simple mode is selected.
Tone squelch is activated.
Some memories have been cleared or the num-
ber of active memories has been reduced.
ANI mode can only be accessed through cloning.
The desired function(s) has not been assigned to
a key.
SOLUTION
Charge the battery pack or place new dry cell bat-
teries in the battery case.
(Remove the battery pack if you will not be using the trans-
ceiver for a long time.)
Charge the batteries or place new dry cells in the
battery case.
Push [
A V] to select VFO mode; or, turn power on
while pushing [Y] + [0] to exit channel indication.
Set [D L] down to deactivate the lock function.
Program different frequencies.
Program additional memories; or, cancel skip set-
tings for one or more channels.
Program the memory channels or set to microphone
normal.
Turn off the tone squelch.
Program the cleared memories or increase the num-
ber of active memory channels.
Set ANI operation using the CS-T2
CLONING SOFT
-
WARE
.
Set the desired function(s) using Key Customize
mode.
REF.
pgs. 9,
10
pgs. 9,
10
pgs. 11
p. 13
p. 19
p. 25
pgs.
19, 28
p. 26
pgs.
19, 30
p. 36
p. 31
IC-T2H_RTTE.qxd 03.6.20 18:58 Page 37 (1,1)
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-T2H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-T2H in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info