12784
38
Zoom out
Zoom in
Previous page
1/48
Next page
34
11 ANI OPERATION
Operation
D Calling a specic station
Turn power on and set the [VOL] control to the 10 or 12 o-
clock position.
Push the [Y]/[Z] keys to set the desired channel.
•“ appears when the ANI function has been programmed via
cloning.
Push [PTT] once to connect to the selected station or enter
a 3-digit ANI code, if required (in this case it is not neces-
sary to push [PTT]transmit is automatic after entry of the
3rd digit).
The transceiver transmits the pre-programmed selective code.
When the transceiver rings (an answer back is received),
wait for a connection code from the connected station;
when the transceiver doesnt ring, push [PTT] again to exit
the standby condition, then try again from step after wait-
ing awhile.
When the connection code is received, a beep sounds,
then “” flashes; when the connection code is not re-
ceived within 10 sec., the transceiver transmits a discon-
nect code automatically (“” does not flash). Try again
from step after waiting awhile , in such a case.
When “” ashes, you can converse with the connected
station.
Push to transmit; release to receive.
When your conversation is finished, transmit the discon-
nect code.
While pushing [PTT], push [#].
Some transceivers cannot transmit a disconnect code depend-
ing on programming.
NOTE: When your conversation extends into the ANI time-
out time, the transceiver transmits a disconnect code au-
tomatically.
Transmit
a selective code
Push [PTT] to
exit standby
Converse
Transmit a
disconnect code
manually
Receive an
answer back
code
Receive
a connection
code
Transmit
disconnect code
automatically
No
Ye s
No
Try again after a while
IC-T2H_RTTE.qxd 03.6.20 18:58 Page 34 (1,1)
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-T2H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-T2H in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info