12784
16
Zoom out
Zoom in
Previous page
1/48
Next page
12
4
BASIC OPERATION
Dial select function
Use the dial select function to adjust the tuning behaviour or
the [Y]/[Z] keysuse 1 MHz tuning when you want to
change the frequency in large increments; use the selected
tuning step when you want to change the frequency in smaller
increments.
Push [t] one or more times to
select the desired [Y]/[Z] key
tuning increment.
1 MHz tuning, 100 kHz tuning or
regular tuning steps can be selected
(see diagram at right).
Release [t] to return to normal operation.
Receive and transmit
Rotate [PWR/VOL] clockwise to turn power ON.
Adjust volume to the desired level.
While pushing [ ], rotate [VOL].
Set a frequency.
When a signal is received:
Squelch opens and audio is emitted from the speaker.
BUSY appears and the S/RF indicator shows the relative sig-
nal strength.
Push [H/L] to toggle output power between high and low.
•“LOW appears when low output power is selected.
Push and hold [PTT] to transmit; then speak into the mi-
crophone.
Do not hold the microphone too close to your mouth or speak
too loudly. This may distort the signal.
The TX indicator lights red.
The S/RF indicator shows the output power selection.
IC-T2H_RTTE.qxd 03.6.20 18:57 Page 12 (1,1)
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-T2H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-T2H in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info