458648
90
Zoom out
Zoom in
Previous page
1/108
Next page
New2001
82
9
OTHER FUNCTIONS
New2001
Tone search
By monitoring a signal that is being operated with pocket
beep, tone or DTCS squelch function, you can determine the
tone frequency or DTCS code necessary to open a squelch.
q
Set the frequency to be checked for a tone frequency or
DTCS code.
w
Enter “TONE SEARCH” in SEARCH menu.
MENU SEARCH TONE SEARCH
(Push [MENU ]), (Push [r]/[s], then push [ENT MW].)
SEARCH menu can also be entered by pushing and holding
[SEARCH] for 1 sec.
Tone search screen appears.
e Push [r] or [s] to select TSQLor DTCS,then push
[ENT MW] to start the tone search.
To change the searching direction, rotate [DIAL].
Tone squelch or DTCS squelch function is activated automatically.
MW
MENU
ENT
HOLD V
SCAN
.
1
4
7
2
5
8
0
3
6
9
SKIP
NO.
CLR
SQL
DIAL
SEARCH
ATT
MW
ENT
MENU
Push
MW
ENT
r When the tone frequency or DTCS code is decoded,
the setting menu contents are programmed with the fre-
quency or code.
The tone search pauses for the set period in search pause
timer (p. 40) when a tone frequency or DTCS code is detected.
The decoded tone frequency is used for the tone squelch fre-
quency (TSQL FREQ) when the tone squelch is ON.
The decoded DTCS code is used for the DTCS code when the
DTCS squelch is ON.
Tone search for tone squelch Tone search for DTCS squelch
t Push [CLR SQL] to stop the search.
If the search is cancelled before the receiver detects the tone or
code, the setting menu contents are not changed.
The detected tone is used for temporary operation only. The
stored tone setting in memory channel won’t be changed.
NOTE: Tone frequency is over-written automatically when it cor-
responds with the searching tone frequency in tone squelch mode.
However, it is not over-written in memory channel.
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-RX7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-RX7 in the language / languages: English as an attachment in your email.

The manual is 8,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info