670468
73
Zoom out
Zoom in
Previous page
1/192
Next page
5-7
DD
Scope set mode (continued)
5
RECEIVE FUNCTIONS
Turn the peak level holding function ON or OFF.
Max Hold
ON
Select the center frequency of the spectrum scope
indication (center mode only).
Filter center : Shows the selected filter’s center
frequency at the center.
Carrier Point Center
: Shows the selected operating
mode carrier point frequency at
the center.
Carrier Point Center (Abs. Freq.)
: In addition to the carrier point
center setting above, the actual
frequency is displayed at the bot-
tom of the scope.
CENTER Type Display
Filter Center
Set the waveform color for the currently received sig-
nals.
The color is set in RGB format.
Push [F-3•Ω≈] to select R (Red), G (Green) and B
(Blue), and rotate the ratio from 0 to 255 range.
The set color is indicated in the box beside the RGB
scale.
Waveform Color (Current)
161 185 221
Set the waveform color for the receiving signals max-
imum level.
The color is set in RGB format.
Push [F-3•Ω≈] to select R (Red), G (Green) and B
(Blue), and rotate the ratio from 0 to 255 range.
The set color is indicated in the box beside the RGB
scale.
Waveform Color (Max Hold)
130 66 176
Set the marker color for the displayed frequency while
the fix mode.
The color is set in RGB format.
Push [F-3•Ω≈] to select R (Red), G (Green) and B
(Blue), and rotate the ratio from 0 to 255 range.
The set color is indicated in the box beside the RGB
scale.
Marker Color (RX)
255 150 50
Set the marker color for the peak frequency of the re-
ceiving signals.
The color is set in RGB format.
Push [F-3•Ω≈] to select R (Red), G (Green) and B
(Blue), and rotate the ratio from 0 to 255 range.
The set color is indicated in the box beside the RGB
scale.
Marker Color (Peak)
255 0 0
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R9500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R9500 in the language / languages: English as an attachment in your email.

The manual is 21,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info