Manual Icom IC-R9500 (page 23 of 192) (English)

670468

Zoom out

Zoom in

1/192

1-13

PANEL DESCRIPTION

o MULTIFUNCTION SWITCH GUIDE

Indicates the function of the multifunction switches.

!0 LCD FUNCTION SWITCH GUIDE

Indicates the function of the LCD function switches

([F-1] – [F-7]).

!1 MULTIFUNCTION SCREEN

Shows the screens for the spectrum scope, voice

recorder, memory channel list, scan, FSK decoder,

IF filter selection or set modes, etc.

!2 TUNING STEP INDICATOR (p. 3-5)

Shows the selected tuning step.

!3 1/4 FUNCTION INDICATOR (p. 3-6)

Appears when the 1/4-speed tuning function is acti-

vated in CW and FSK modes.

!4 AUTOMATIC TUNE INDICATOR (p. 5-17)

“” blinks during automatic tuning. This

feature is active in AM, SSB and CW mode.

!5 MEMORY CHANNEL INDICATOR (p. 7-3)

Indicates the selected memory channel number.

!6 TUNING DIGIT INDICATOR (p. 3-5)

Shows the tuneable digit when rotating the main

dial.

!7 TONE/DTCS/NAC/SELECTIVE SQUELCH

INDICATOR

➥ “” or “ ” appears when the tone

squelch or DTCS squelch is set in FM mode.

(p. 4-4)

➥ “” or “ ” appears when the NAC

squelch or selective squelch is selected in P25

mode. (Requires optional UT-122.) (p.4-19)

!8 BANK INDICATOR (p. 7-3)

Appears when the bank limit function is in use and

indicates the selected bank number.

• BANK-0 to BANK-9, BANK-A (AUTO MW), BANK-S

(SKIP) and BANK-P (SCAN EDGE) are selectable.

!9 NOISE BLANKER INDICATOR (p. 5-15)

“” or “ ” appears when either noise

blanker 1 or noise blanker 2 is ON. This function is

not available for FM, WFM or P25 mode.

@0 CF CARD/USB-MEMORY INDICATOR (p. 11-16)

➥ “” appears when CF card is correctly con-

nected and blinks while CF card is active.

• This indicator is normally stayed ON.

➥ “” appears when USB equipment (USB-

Memory or keyboard, etc) is connected, and

blinks while it is active.

@1 CLOCK READOUT (p. 10-2)

Shows the current time. Local and UTC time can in-

dicate at the same time.

@2 NOISE REDUCTION INDICATOR (p. 5-16)

Appears when noise reduction function is in use.

@3 BANDPASS FILTER INDICATOR

Appears when the narrow filter (500 Hz or less) is

selected during CW or FSK operation.

@4 PASSBAND WIDTH INDICATOR (p. 5-11)

Graphically displays the passband width for twin

PBT operation and center frequency for IF shift op-

eration.

@5 AUDIO PEAK FILTER INDICATOR (p. 4-9)

Appears when the audio peak filter function is in use.

This function is available in CW mode

@6 SHIFT FREQUENCY INDICATOR (p. 5-11)

Shows the shift frequency of the IF filter.

@7 NOTCH FILTER INDICATOR (p. 5-16)

➥ “” appears when the auto notch function is in

use. This function is available in FM, WFM, AM

and SSB modes.

➥ “” or “ ” appear

s when the manual notch

filter function is in use. This function is available in

AM, SSB, CW and FSK mode.

@8 BAND WIDTH INDICATOR (p. 5-11)

Shows the passband width of the IF filter.

@9 DUPLEX INDICATOR (p. 4-3)

“” or “ ” appears when the negative duplex

or positive duplex operation is selected, respectively.

DUP+

DUP–

MN2

MN1

USB

NB2

NB1

SEL

NAC

DTCS

TSQL

AUTO TUNE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R9500 in the language / languages: English as an attachment in your email.

The manual is 21,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-R9500 Manual

Product: