670434
62
Zoom out
Zoom in
Previous page
1/96
Next page
9
SCANS
9-9
Mode select memory scan Setting the skip frequency
Repeatedly scans the selected receive mode (ignoring
other modes) while memory scanning, except
Programed Scan Edge channels (P00A/P49A ~ P00B/
P49B)
.
D Setting the receive mode
1. Select the receive mode.
2. Open the SCAN screen.
MENU
» SCAN
3. Touch [TYPE/SET].
4. Touch [MODE].
5. Touch [SELECT] to select the item, then rotate
to change the setting.
• Set the channel group and edge channels.
LYou cannot change the receive mode on this screen.
6. Touch [SELECT] several times to exit the edit
mode, then touch [START].
• The mode select memory scan starts.
L “MODE SELECT MEMORY SCAN” and decimal
points blink while scanning.
• Touch [STOP] to cancel the scan.
7. To close the SCAN screen, push
EXIT
.
You can set a frequency as a skip frequency that is
skipped (ignored) during a VFO scan*.
* Programmed scan, Fine Programmed scan, Auto Write Memory
scan, F scan and Fine F scan
D Setting the skip frequency
z Hold down for 1 second while a signal is
received and the scan is paused.
The frequency is stored as the Scan Skip channel (S00
~ S99).
L The “PSKIP (Program SKIP)” is displayed on the skip
channel.
LDuring a VFO scan, the skip frequency is not skipped.
D Canceling the skip frequency
1. Touch the memory channel number.
2. Touch [SKIP].
L Each touch changes between “SKIP,” “PSKIP” and
“(no icon).”
L"PSKIP" disappears and the skip setting is cancelled.
3. To close the VFO/MEMORY screen, push
EXIT
.
SCAN screen
Blinks
Deactivated
during a Memory
scan
VFO/MEMORY screen
99chWFM WFM
00ch
01ch 02ch 03ch
WFM
AM WFM WFM
WFM
AM AM WFM
04ch
05ch06ch50ch98ch
(Example) Group: ALL (Each channel is in the different group.)
All modes except the
WFM are skipped.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info