670434

Icom IC-R8600 Manual

50
Zoom out
Zoom in
Previous page
1/96
Next page
8
MEMORY OPERATION
8-2
z Rotate or to select the desired
memory channel.
L Only the Memory channels that have contents are
displayed.
A single memory channel stores the frequency,
receive mode and IF lter width besides the following
items.
• Tuning step • DUP direction
• P.AMP ON/OFF • TSQL/DTCS setting
• ATT setting • DIGITAL Squelch settings
• Antenna setting • Memory name
• IP+ ON/OFF • SKIP Setting
• DUP mode • SELECT Setting
1. Set the frequency and receive mode and so on.
2. Push .
3. Touch to select the desired memory write option.
[Write to a New Channel]:
• The contents such as frequency and operating mode are
written to a blank channel in the selected group.
[Write to the Selected Channel]:
• The selected channel is overwritten.
[Select the Channel and Write]:
• The channel is written to the channel selected on the CH
SELECT screen.
Selecting a memory channel
Writing a memory channel
(Example: Memory channel 04)
Memory mode
Group number Channel number
D Selecting with
1. Push
V/M
to select the Memory mode.
2.
Rotate to select the desired memory channel.
D Selecting with
1. Push
V/M
to select the Memory mode.
2. Push .
• LED on the key lights.
3. Rotate to select a memory channel.
D Selecting using the keypad
1. Touch the memory channel number.
• The VFO/MEMORY screen is displayed.
2. Push or to select the group.
3. Touch [CH-INP].
4. Touch the numeric keys to enter the desired
memory channel number.
5. Touch [ENT] to set the entered memory channel.
6. Push to close the VFO/MEMORY screen.
Memory write options
Number of
remaining blank
channels
Channel
number
Memory
contents
Group
Memory name
(if entered)
Insert a new channel without overwriting
the selected channel.
CH SELECT screen example
InformationL : Selecting a memory channel in a different group
You can select the desired Memory channel stored in all memory channel groups.
1. Push , and touch [Channel Select Group Range].
2. Touch [All Groups].
3. Rotate to continuously select a memory channel
in all memory channel groups.
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info