670434
27
Zoom out
Zoom in
Previous page
1/96
Next page
4
SCOPE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
4-3
D Touch screen operation
When you touch the FFT scope zone or the waterfall
zone on the SPECTRUM SCOPE screen, the area will
be zoomed in. Then, touch the signal in the zoomed
area to tune into the signal on the SPECTRUM
SCOPE screen.
1. Open the SPECTRUM SCOPE screen.
MENU
»
SCOPE
2. Touch the Scope screen.
• The area around the touched point is zoomed in.
L
Touch out of the zoomed area to close the zoomed
window.
3. Touch the signal in the zoomed area.
The receiving frequency is tuned into the touched
signal frequency.
4. To exit the SPECTRUM SCOPE screen, push .
D Searching for the peak signal
You can nd the strongest signal within the scope
frequency range.
1. Open the SPECTRUM SCOPE screen.
MENU
»
SCOPE
2. Touch [<1>] to select the [<2>] menu.
L Each touch toggles between menu [<1>] and [<2>].
3. Touch [PEAK ].
The Peak Pointer appears on the strongest signal
frequency within the scope frequency range.
4. To exit the peak search menu, push .
Spectrum scope screen (Continue)
[Search menu keys]
Key Action
SEARCH
Touch to put the peak pointer on the strongest
signal frequency.
HOLD
Touch
Turns the Hold function ON or OFF.
HOLD
” and the Marker are
displayed. Freezes the current
spectrum.
Touch for
1 second
Clears the Peak Hold level.
NEXT
LEV
Enters to the Next Peak level mode.
Popup “NEXT
” is displayed.
Rotate
to search for the next peak
in level.
NEXT L/R
Enters to the Peak Select mode.
Popup “NEXT ” is displayed.
Rotate
to select the next peak.
→RX
Touch for 1 second to tune the frequency to
the current peak level signal.
D Mini scope screen
The Mini scope screen can be simultaneously
displayed with another function display, such as the
FSK DECODE screen.
z
Push
M.SCOPE
to turn the Mini scope screen ON or OFF.
L Hold down
M.SCOPE
for 1 second to display the
SPECTRUM SCOPE screen.
Mini scope screen (with the Filter setting screen)
The strongest signal
The strongest signal Signal frequency
Peak search mode
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info