3
2
PANEL DESCRIPTION
!1 MEMORY CHANNEL UP/DOWN SWITCHES
[
√√
DN]/[UP
∫∫
] (p. 21)
➥ Select a memory channel.
➥ Select a set mode contents while in set mode.
➥ Select a timer or time indication while in clock in-
dication.
➥ Select a filter set mode contents while in filter set
mode.
!2 MEMORY WRITE SWITCH [MW] (pgs. 22, 27)
➥ Stores the displayed frequency and operating
mode into the selected memory channel when
pushed for 2 sec.
➥ Toggles the programmed scan and auto memory
write scan when pushed.
!3 CLEAR SWITCH [CLR] (p. 24)
➥ Clears the input digits while inputting a frequency
or memory channel number.
➥ Clears the selected memory channel contents
when pushed for 2 sec. in memory mode.
•This switch does not function in VFO mode.
!4 VFO/MEMORY SWITCH [V/M] (pgs. 21, 23)
➥ Toggles the operating mode between VFO mode
and memory mode when pushed.
➥ Selects a memory channel for inputting a mem-
ory channel number when pushed.
➥ Transfers the memory contents to VFO when
pushed for 2 sec.
!5 KEYPAD (pgs. 11, 21)
The keypad can be used for several functions as
below:
• Keypad then [ENT]
— Direct frequency input.
• Keypad then [V/M]
— Memory channel selection.
• [ENT] then keypad in memory name indication
mode
— Alphanumeric input for memory name, etc.
!6 QUICK TUNING STEP SWITCH [TS] (pgs. 12, 13)
➥ Selects a quick tuning step or turns the quick tun-
ing step OFF.
•While the quick tuning indicator (
√√
) is displayed, the
frequency can be changed in kHz or MHz steps.
➥ While the quick tuning step is OFF, turns the 1 Hz
step ON and OFF when pushed for 2 sec.
•1 Hz indication appears and the frequency can be
changed in 1 Hz steps.
➥ While the kHz quick tuning step is selected, en-
ters tuning step set mode when pushed for 2 sec.
➥ While the memory name indication is selected in
memory mode, pushing this switch shows the op-
erating frequency; and rotating the tuning dial
while pushing this switch changes the frequency
temporally.
!7 FILTER SWITCH [FIL] (pgs. 18, 19)
➥ Push momentarily to toggle between the pre-pro-
grammed normal, wide and narrow IF filters for
the selected operating mode.
➥ Push for 2 sec. to enter filter set mode.
!8 MODE SWITCHES [SSB]/[CW/RTTY]/[AM]/[FM]
(p. 14)
Select an operating mode.
• Push [SSB] to toggle between LSB and USB.
• Push [CW/RTTY] to toggle between CW and RTTY.
• Push [CW/RTTY] for 2 sec. to toggle between CW and
CW reverse or RTTY and RTTY reverse.
• Push [AM] to select AM.
• Push [FM] to select FM.
