670464
88
Zoom out
Zoom in
Previous page
1/96
Next page
75
New2001New2001
MAINTENANCE
13
Troubleshooting
If your receiver seems to be malfunctioning, please check
the following points before sending it to a service center.
PROBLEM POSSIBLE CAUSE SOLUTION REF.
No power comes on. The batteries are exhausted.
The battery polarity is reversed.
• Replace or charge the batteries.
• Check the battery polarity.
pp. 5, 7
p. 5
No sound comes from the
speaker.
Volume level is too low.
• Squelch level is set too tight.
• A different tone squelch tone is selected.
• Push
[Y]
to obtain a suitable level.
While holding down [SQL], rotate [DIAL] to set the
squelch level.
Turn the appropriate function OFF.
p. 13
p. 14
p. 41
Sensitivity is low and only
strong signals are audible.
The attenuator function is activated. While holding down [FUNC], push [SQL] to turn the
attenuator function OFF.
p. 15
Frequency cannot be set. The lock function is activated. While holding down [FUNC], push [
](BAND) for
1 second to turn the function OFF.
p. 12
No beep sounds. The beep tones are turned OFF or the beep
tone level is too low.
Turn the beep tone ON, or set the beep tone level to
appropriate level in the Set mode.
p. 47
Audio is distorted. • The operating mode is not selected correctly. Push [MODE] repeatedly to select a suitable
operating mode.
p. 14
Desired Set mode item
cannot be selected.
The “EXPAND” item is set to OFF. Turn the “EXPAND” item ON. p. 45
Programmed scan does
not start.
• Program scan edges are not programmed. • Program a pair of scan edge channels. p. 30
Memory or bank scan does
not start.
No or only one memory or bank channel is
programmed.
• Program at least 2 memory or bank channels pp. 19, 20
Installed batteries cannot
be charged.
The batteries are over discharged. Re-install the batteries (wait at least for 2 second),
then plug the AC adapter or CP-18A/E while holding
down [FUNC].
p. 7
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R6 in the language / languages: English as an attachment in your email.

The manual is 5,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info