458647
78
Zoom out
Zoom in
Previous page
1/96
Next page
65
11
CONTROL COMMAND
New2001
Cmd.
Sub
Cmd.
Data Description
00 see the right Send frequency data for transceive
01 02, 05, 06 Send mode data for transceive
02=AM, 05=FM, 06=WFM
03 see the right Read operating frequency
04 02, 05, 06 Read operating mode
02=AM, 05=FM, 06=WFM
05 see the right Set operating frequency
06 02, 05, 06 Operating mode selection
02=AM, 05=FM, 06=WFM
11 00/10 Send/read the attenuator function
setting
00=OFF, 10=ON (approx. 10dB)
12 00/01 Send/read ANT selection
0.495 to 1.620 MHz band:
00=EXT, 01=BAR*
*“BAR” can only be selected in AM mode.
Other frequency band:
00=EXT, 01=EAR
14 01 see p. 66 Send/read the volume level
03 see p. 66 Send/read the squelch level
15 01 00/01 Read the squelch status
00=Squelch close, 01=Squelch open
02 see p.66 Read the S-meter level
16 43 00, 01, 02 Send/read the tone squelch setting
00=OFF, 01=TSQL, 02=TSQL-R
4B 00, 01, 02 Send/read the DTCS squelch setting
00=OFF, 01=DTCS, 02=DTCS-R
Cmd.
Sub
Cmd.
Data Description
16 4C 00/01 Send/read the VSC function setting
00=OFF, 01=ON
19 00 Read the receiver ID
1A 00 00/01 Send/read the AF filter setting
00=Filter OFF, 01=Filter ON
1B 01 see p. 66 Set/read TSQL tone frequency
02 see p. 66 Set/read DTCS code with polality
D Data content description
Receive frequency (Command: 00, 03, 05)
q
XX X X X
w e
X
r t
XX XX
10 Hz digit: 0, 5*
(depending on 100 Hz)
1 Hz digit: 0 (Fixed)
1 kHz digit: 0–9
100 Hz digit: 0, 2, 5, 7
100 kHz digit: 0–9
10 kHz digit: 0–9
10 MHz digit: 0–9
1 MHz digit: 0–9
1000 MHz digit: 0, 1
100 MHz digit: 0–9
* 0: When 100 Hz digit is 0 or 5, 5: When100 Hz digit is 2 or 7
When the tuning step is selected 8.33 kHz (Air band),
100 Hz digit, 10 Hz digit and 1 Hz digit can be set 3 or 6.
■Command table
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R6 in the language / languages: English as an attachment in your email.

The manual is 8,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info