458647
63
Zoom out
Zoom in
Previous page
1/96
Next page
50
9
SET MODE
New2001
9
D Auto power OFF (AP OFF)
The receiver can be set to automatically turn OFF, and
sound a beep, after a specified period when no key opera-
tions are performed.
OFF (default), times of 30, 60, 90, 120 minutes and BUSY
can be specified. The (repetitive) period is retained even
when the receiver is turned OFF, even by the auto power
OFF function. To cancel the function, select “OFF”.
When “BUSY” is selected, the receiver will automatically turn
OFF when no key operations are performed and no signal is
received for 3 minutes.
D Scan pause timer (PAUSE)
Selects the scan pause time. When receiving signals, the
scan pauses according to the scan pause time.
(default: 10SEC)
• 2–20SEC : The scan pauses for 2–20 seconds on a
received signal, and is selected in 2 seconds
steps.
• HOLD : The scan pauses on a received signal until it
disappears. Rotate [DIAL] to resume manually.
D Scan resume timer (RESUME)
Selects the scan resume time. The scan resumes after the
specified period after the received signal disappears.
(default: 2SEC)
• 0SEC : The scan resumes immediately after the
received signal disappears.
• 1–5SEC : The scan pauses 15 seconds after the
received signal disappears.
• HOLD : The scan pauses on the received frequency,
even if the signal disappears. Rotate [DIAL]
to manually resume the scan.
The scan resume timer must be set shorter than the scan
pause timer, otherwise this timer will not be activated.
D Scan stop beep (STOP B)
Turns the scan stop beep function ON or OFF (default).
When the function is activated (ON is selected), a long
beep will sound each time a signal is received during a scan.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R6 in the language / languages: English as an attachment in your email.

The manual is 8,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info