The programmed scan can store the scanning step, receive
mode and attenuator settings.
q Push [V/M] to select the memory mode.
w
Rotate [DIAL] to select a desired scan edge channel.
e
Hold down [S.MW](V/M) for 1 second to enter the select
memory write mode.
• 1 short and 1 long beep sounds.
• The “
” icon and memory channel number blink.
r While holding down [MODE], rotate [DIAL] to select the
“TS,” “MODE” or “ATT” item when programming the tuning
step, the receive mode or the attenuator setting.
• The item can also be selected by repeatedly pushing [MODE].
Scan step selection
After
released.
Receive mode selection
After
released.
Attenuator setting
After
released.
t Rotate [DIAL] to select a desired option.
Or, select the “-- -- -- --” display when erasing thecontents“-- -- -- --” display when erasing the contents-- -- -- --” display when erasing the contents”display when erasing the contents display when erasing the contents
from the option.
• If “---- ----” isselectedinthis step,the programscanuses the“------ --”is selectedinthis step,theprogramscan usesthe-- -- -- --” isselectedin thisstep,theprogramscanuses the” isselectedinthis step,the programscanuses the is selected in this step, the program scan uses the
VFO settings.
y Hold down [S.MW](V/M) for 1 second to program the
name and exit the programming mode.
• 3 beeps sound.
During the full/band scan:
The selected tuning step, received mode and attenuator set-
tings in each frequency band are used.
During the programmed/programmed link scan:
The programmed tuning step, received mode and attenuator
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Icom IC-R6 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Icom IC-R6 in the language / languages: English as an attachment in your email.
The manual is 8,78 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
