12738
73
Zoom out
Zoom in
Previous page
1/80
Next page
62
12
MAINTENANCE
11
12
PROBLEM POSSIBLE CAUSE SOLUTION REF.
Troubleshooting
If your receiver seems to be malfunctioning, please check the
following points before sending it to a service center.
No power comes on.
No sound comes from the
speaker.
Sensitivity is low and only
strong signals are audible.
Frequency cannot be set.
No beep sound.
Receive audio is distorted.
Desired set mode item
cannot be selected.
Programmed scan does
not start.
Memory or bank scan
does not start.
Installed batteries cannot
be charged.
The batteries are exhausted.
The battery polarity is reversed.
Volume level is too low.
Squelch level is set too tight.
Different tone is selected with tone squelch.
Attenuator function is activated.
The lock function is activated.
Beep tones are turned OFF or the beep tone level
is too low.
The operating mode is not selected correctly.
•“EXPAND item is set to OFF.
Some set mode items can be selected in the AM
or FM broadcast band only.
Program scan edges are not programmed.
No or only one memory or bank channel is pro-
grammed.
The batteries over discharged.
Replace the batteries or charge the batteries.
Check the battery polarity.
Push [Y] to obtain a suitable level.
While pushing [SQL], rotate [DIAL] to set the
squelch level.
Turn the appropriate function OFF.
While pushing [FUNC], push [SQL] to urn the at-
tenuator function OFF.
While pushing [FUNC], push [BAND ] for
1 sec. to turn the function OFF.
Turn beep tone ON or set the beep tone level to ap-
propriate level in set mode.
Push [MODESCAN] several times to select a suit-
able operating mode.
Turn EXPAND item ON.
Choose the AM or FM broadcast band.
Program a pair of scan edge channels.
Program at least 2 memory or bank channels
Re-install the batteries (wait at least for 1 sec.),
then plug the AC adapter while pushing [FUNC].
pgs. 5, 6
p. 5
p. 11
p. 12
p. 35
p. 13
p. 10
p. 41
p. 12
p. 39
p. 7
p. 27
pgs. 16,
17
p. 6
IC-R5_2.qxd 02.11.27 14:42 Page 62 (1,1)
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R5 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info