458646
56
Zoom out
Zoom in
Previous page
1/80
Next page
45
9 SET MODE
New2001
DD
Offset frequency
Sets the duplex offset frequency for each frequency band in-
dependently within 0 to 159.995 MHz range. During duplex
operation (DUP or +DUP), the monitoring frequency (while
[SQL] is pushed) shifts the set frequency.
The default value may differ according to the selected fre-
quency band
(before accessing set mode) and receiver version.
The selected tuning step in VFO mode is used for the off-
set frequency setting.
DD
Duplex direction
Sets the duplex direction. The displaying frequency shifts the
programmed frequency in offset frequency above when mon-
itor function is in use (while pushing [SQL]).
OFF : Simplex operation. (default)
•–DUP : The displaying frequency shifts down dur-
ing monitor.
+DUP : The displaying frequency shifts up during
monitor.
DD
Tone squelch
Sets tone or DTCS squelch operation and pocket beep capa-
bility, when waiting for the desired signal.
OFF : Regular noise squelch operation. (default)
TSQL : Using tone squelch. The squelch opens only
when a signal with matched subaudible tone
is received.
P BEEP : In addition to the TSQL setting, alert beeps
will sound when a signal with matched tone is
received.
DTCS : Using DTCS squelch. The squelch opens
only when a signal with matched DTCS code
is received.
P DTCS : In addition to the DTCS setting, alert beeps
will sound when a signal with matched DTCS
code is received.
The subaudible tone frequency and DTCS code is pro-
grammed in the tone frequency and DTCS code item, re-
spectively.
Tone squelch operation Pocket beep operation
DTCS squelch operation DTCS beep operation
Simplex operation Positive duplex operation
IC-R5_1.qxd 02.10.23 11:29 Page 45 (1,1)
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R5 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info