458646
40
Zoom out
Zoom in
Previous page
1/80
Next page
29
6 SCAN OPERATION
New2001
Auto memory write scan
This scan is useful for searching a specied frequency range
and automatically storing busy frequencies into memory
channels. The same frequency ranges used for program scan
are used for auto memory write scan.
qSelect VFO mode with [V/MS.MW~].
wPush [MODESCAN] for 1 sec. to enter scanning type se-
lection condition.
eRotate [DIAL] to select the desired scanning type.
•“ALL for full scan; BAND for band scan, PROGxx for pro-
grammed scan (xx= 0 to 24; programmed scan edges numbers
only displayed)
rPush [MODESCAN] to start the scan.
tPush [V/MS.MW~] to turn the automatic memory write
function ON and OFF.
•“ indicator blinks.
yPush [MODESCAN] to stop scan.
DD
During auto-memory write scanning:
When signal is received, scan pauses and the frequency is
stored into auto memory write channel group (
R
000
R
199).
- 2 short beeps sound when stored.
Scan resumes after frequency storing.
When all channels are stored, the scan cancels automati-
cally and 1 long beep sounds.
DD
Re-calling the stored frequencies:
qPush [V/MS.MW~] to select memory mode.
wPush [BAND ] several times, or while pushing
[BAND ], rotate [DIAL] to select the auto memory write
channel group.
•“R appears.
eRotate [DIAL] to select the desired channel.
DD
Clearing the stored frequencies:
qSelect the auto memory write channel group.
wWhile pushing [FUNC], push [V/MS.MW~] for 1 sec. to
clear the all channels contents.
1 short and 1 long beeps sound.
NOTE: The auto memory write channel contents CANNOT
be cleared by an independent channel. Thus it is good idea
to copy the contents into regular memory channel.
FM
R
R
appears when auto memory
write channel group is selected.
FM SKIPP
[V/MS.MW~]
[MODESCAN]
[DIAL]
During auto memory
write scan
indicator blinks dur-
ing auto memory write
scan.
IC-R5_1.qxd 02.10.23 11:29 Page 29 (1,1)
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R5 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info