Manual Icom IC-R5 (page 33 of 80) (English)

458646

Zoom out

Zoom in

1/80

MEMORY CHANNELS

New2001

■ Memory clearing

Contents of programmed memories can be cleared (blanked),

if desired.

qPush [V/M•S.MW•~] for 1 sec. to select select memory

write condition.

• 1 short and 1 long beeps sound.

•“ ” indicator and memory channel number blink.

• Do not hold [V/M•S.MW•~] for more than 2 sec. otherwise the

memory contents will be copied to VFO.

wRotate [DIAL] to select the desired memory channel to be

cleared.

eWhile pushing [MODE•SCAN], rotate [DIAL] to select

“CLEAR.”

• After releasing [MODE•SCAN], “CLR” is displayed instead of the

frequency indication, and only “” indicator blinks.

•“CLEAR” item can also be selected by pushing [MODE•SCAN]

several times.

rPush [V/M•S.MW•~] for 1 sec. to clear the contents.

• 3 beeps sound.

• Return to VFO or memory mode, if VFO is selected before per-

forming the step q.

• Return to select memory write conditions if memory mode is se-

lected before performing the step q.— “” indicator memory

and channel number blink. Push [V/M•S.MW•~] momentarily

to return to memory mode.

While pushing [FUNC], push [V/M•S.MW•~] for 1 sec.

after the step w is operated can also be cleared the mem-

ory contents. In this case, the steps e and r are not nec-

essary.

☞NOTE: Be careful!— the contents of cleared memories

CANNOT be re-called even in bank channel opera-

tion.

Push for 1 sec.

[V/M•S.MW•~]

[MODE•SCAN]

[DIAL]

After [MODE•SCAN]

released

IC-R5_1.qxd 02.10.23 11:28 Page 22 (1,1)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R5 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-R5 Manual

Product: