458646
20
Zoom out
Zoom in
Previous page
1/80
Next page
9
3 FREQUENCY AND CHANNEL SETTING
New2001
Setting a frequency
qPush [V/MS.MW~] to select VFO mode, if necessary.
wSelect the desired frequency band with [BAND ].
Or, while pushing and holding [BAND ], rotate the [DIAL] to
select the desired frequency band.
eRotate [DIAL] to select the desired frequency band.
The frequency changes according to the preset tuning steps.
See the right section for setting the tuning step.
While pushing and holding [FUNC], rotate [DIAL] to change the
frequency in 1 MHz steps (default).
The 1 MHz tuning step (dial select step) can be set to
100 kHz, 1 MHz or 10 MHz tuning steps in set mode. See
p. 15 for details.
Setting a tuning step
The tuning step can be selected for each frequency band,
however, the tuning steps, 8.33 kHz and 9 kHz, are appeared
when setting the tuning step for the VHF air band and AM
broadcast band, respectively. The following tuning steps are
available for the IC-R5.
5.0 kHz 6.25 kHz 8.33 kHz 9.0 kHz
10.0 kHz 12.5 kHz 15.0 kHz 20.0 kHz
25.0 kHz 30.0 kHz 50.0 kHz 100.0 kHz
DD
Tuning step selection
qPush [V/MS.MW~] to select VFO mode, if necessary.
wPush [BAND ] to select the desired frequency band.
Or, while pushing and holding [BAND ], rotate the [DIAL] to
select the desired frequency band.
ePush [TSSET] to enter tuning step selecting condition.
rRotate [DIAL] to select the desired tuning step.
tPush [TSSET] to return to VFO mode.
[DIAL]
[TSSET]
5 kHz tuning step
FM
75
50
25
FM
75
50
25
[BAND ]
[DIAL]
[FUNC]
[DIAL] changes the frequency
according to the selected tuning
step.
While pushing [FUNC], [DIAL]
changes the frequency in 1 MHz
steps (default).
IC-R5_1.qxd 02.10.23 11:28 Page 9 (1,1)
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R5 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info