12736
60
Zoom out
Zoom in
Previous page
1/64
Next page
56
18
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION REF.
No power comes ON. The batteries are exhausted.
The battery polarity is reversed.
Replace the batteries or charge the battery pack.
Check the battery polarity.
pgs. 1,
46
p. 1
No sound comes from the
speaker.
Volume level is too low.
The squelch level is set too tight.
Different tone is selected with tone squelch.
Push [UP] to obtain a suitable level.
Open the squelch.
Check the tone using tone scan.
p. 11
p. 11
p. 30
Frequency cannot be set. The lock function is activated. Push [FUNC] + [MODE(SET)] for 2 sec. to cancel the
function.
p. 9
No beeps sound. Beep tones are turned OFF or the beep tone
level is low.
Turn beep tones ON or set the beep tone level to
appropriate level in set mode.
p. 40
Receive audio is
distorted.
The operating mode is not selected correctly. Push [MODE] to select a suitable operating mode. p. 12
Desired set mode item
cannot be selected.
Some set mode items can be selected only
when the color LCD is ON.
Some set mode items cannot be selected in
the broadcast band.
Turn the color LCD ON.
Choose a band other than the broadcast band.
pgs. 6,
38
p. 38
If your receiver seems to be malfunctioning, please check the
following points before sending it to a service center.
! IC-R3_4.qxd 03.5.2 2:51 PM Page 56 (1,1)
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R3 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info