12736
32
Zoom out
Zoom in
Previous page
1/64
Next page
28
8
SUBAUDIBLE TONE OPERATION
Tone squelch operation
DD
Operation
The tone squelch opens only when receiving a signal con-
taining a matching subaudible tone. You can silently wait for
calls from group members using the same tone in an ama-
teur band.
q Set the operating frequency in FM mode.
w Set the desired subaudible tone in set mode.
See the following section for programming.
e Push [FUNC] + [(MODE) SET] momentarily to enter set
mode.
Select a non-band scope screen in advance for color LCD.
r Rotate [DIAL] until Tone Squelch or tSqL appears.
•“tSqL disappears after 1 sec. and to appears when color LCD
is OFF.
t Push [] or rotate the tuning dial while pushing [FUNC] to
select TSQL (tone squelch).
y Push [(MODE)SET] to exit set mode and start the tone
squelch.
u When the received signal includes a matching tone, the
squelch opens and the signal can be heard.
When the received signals tone does not match, tone squelch
does not open, however, the S-indicator shows signal strength.
To open the squelch manually, push and hold [SQL]. (default)
i To cancel the tone squelch, repeat steps ey as de-
scribed above and select OFF in step t.
DD
Setting subaudible tones for tone squelch
operation
q Select VFO mode or desired memory channel to be pro-
grammed.
Each operating band and each memory channel have indepen-
dent settings.
w Push [FUNC] + [(MODE) SET] momentarily to enter set
mode.
Select a non-band scope screen in advance for color LCD.
e Rotate [DIAL] until Tone Freq. or tonE appears.
•“tonE disappears after 1 sec. and Ct appears.
r Push [] or rotate the tuning dial while pushing [FUNC] to
select a subaudible tone.
t Push [(MODE)SET] to exit set mode.
Tone function set
mode
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: TSQL
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone squelch OFF Tone squelch ON
! IC-R3_4.qxd 03.5.2 2:51 PM Page 28 (1,1)
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R3 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info