12736
18
Zoom out
Zoom in
Previous page
1/64
Next page
General
The receiver has 400 memory channels in 8 banks (AH) for
storage of often-used frequencies.
DD
Memory channel contents
The following information can be programmed into memory
channels:
Operating frequency (p. 8)
Receive mode (p. 12)
Tuning step (p. 8)
Memory name (p. 17)
Duplex direction (DUP or DUP) with an offset frequency
(p. 31)
Tone squelch ON/OFF (p. 28)
Tone squelch frequency (p. 28)
Scan skip setting (p. 22)
Programming during selection
q Push [] to select an operating band.
w Set the desired frequency:
Set the frequency using [DIAL].
Set other data (e.g. offset frequency, duplex direction,
tone squelch frequency, etc.), if required.
e Push [V/M] for 1 sec. to indicate memory channels.
Do not hold [V/M] for more than 2 sec., otherwise the previously
selected memory channel will be overwritten.
r Rotate [DIAL] to select the desired channel.
VFO (VF), as well as regular memory channels, can be pro-
grammed in this way.
Rotate [DIAL] while pushing [FUNC] to select a memory bank
(AH), programmed scan edge channel or VFO (VF).
t Push [V/M] for 1 sec. to program.
Keep pushing for 2 sec. or more to automatically select the next
memory channel, if desired.
14
5
MEMORY CHANNELS
FM DUP TSQL
P
FM
V/M SKIP V/M SKIP
FUNC
FM DUP TSQL
P
S1 3 5 7 9
VOL
FM PSKIPTSQLDUP
145.600.000
TS
15.0
S1 3 5 7 9
VOL
FM
146.010.000
M:A00
TS
15.0
S1 3 5 7 9
VOL
. .
M:E40
TS
.
S1 3 5 7 9
VOL
FM PSKIPTSQLDUP
145.600.000
E41
TS
15.0
for 1 sec.
blank
channel
for 2 sec.
for bank
selection
for CH
selection
+
[EXAMPLE]: Programming ch 40 of memory bank E during selection (and ch 41 selection).
! IC-R3_4.qxd 03.5.2 2:50 PM Page 14 (1,1)
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R3 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info