12736
7
Zoom out
Zoom in
Previous page
1/64
Next page
3
2
PANEL DESCRIPTION
t VFO/MEMORY SWITCH [V/M (SKIP)]
Push [V/M] to toggle between VFO and memory modes.
(p. 7)
Push [V/M] for 1 sec. to enter memory write mode.
Push [V/M] for 2 sec. to write the operating frequency
into the selected memory channel in VFO mode. Keep
pushing for 2 sec. or more to automatically select the
next memory channel, if desired. (p. 14)
Push [FUNC] + [(V/M)SKIP] to toggle the frequency skip
function ON or OFF in VFO mode. (p. 24)
Push [FUNC] + [(V/M)SKIP] to toggle the channel as
skip, program skip or non-skip channel in memory
mode. (p. 22)
Push [FUNC] + [(V/M)SKIP] for 2 sec. to program the
memory name while displaying the memory channel in
the color LCD. (p. 17)
y MODE SWITCH [MODE (SET)]
Push [MODE] to select the receive mode. (p. 12)
Push and hold [MODE] to enter tuning step setting con-
dition and rotate the tuning dial to select the tuning step.
(p. 8)
Push [FUNC] + [(MODE)SET] to enter set mode. (p. 38)
Push [FUNC] + [(MODE)SET] for 2 sec. to toggle the
lock function ON and OFF. (pgs. 9, 24)
u MONITOR SWITCH [SQL (ATT)]
Push and hold to temporarily open the squelch and
monitor the operating frequency. (pgs. 12, 41)
While pushing [SQL], rotate the tuning dial to set the
squelch threshold level. (p. 11)
Push [FUNC] + [(SQL)ATT] to enter the attenuator set-
ting condition and rotate the tuning dial to set the atten-
uation level. (p. 9)
i EXTERNAL DC POWER JACK [DC 6V]
Allows operating of the repeater and charging of the BP-206
using the BC-153A/D wall charger, or using an optional CP-
18A/E cigarette lighter cable.
o AUDIO AND VIDEO OUTPUT JACK [A/V OUT]
Outputs a composite video and audio signals. (p. 5)
!0 TUNING DIAL [DIAL]
Rotate [DIAL] to set operating frequencies, memory
channels, set mode contents, etc. (pgs. 7, 38)
While scanning, changes the scanning direction. (p. 19)
While pushing [SQL], sets the squelch level. (p. 11)
While pushing [FUNC], sets the operating frequency in 100
kHz, 1 MHz or 10 MHz steps in VFO mode. (pgs. 8, 39)
While pushing [FUNC], sets the memory bank in mem-
ory mode. (p. 16)
While pushing [], selects programmed scan bank or
memory bank in VFO or memory mode, respectively.
Release [] to start the scan. (pgs. 19, 20)
!1 EXTERNAL SPEAKER JACK [SP]
Connects an optional earphone or headphone. The inter-
nal speaker will not function when any external equipment
is connected. (See p. 55 for a list of available options.)
! IC-R3_4.qxd 03.5.2 2:50 PM Page 3 (1,1)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R3 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info