5
MEMORY OPERATION
30
5
■ Memory bank setting
[
The IC-R2500 has a total of 21 banks (A to H, J to R, T, U,
W, Y). Regular memory channels, 0 to 999, may assigned
into the desired bank for easy memory management.
q Select the desired memory channel.
➥ Push [VFO/MR•S.MW] to select memory mode
in the
main band, then rotate the same band’s [DIAL] to se-
lect the desired memory channel.
•“!” and memory channel number appear.
w Push and hold the same band’s [VFO/MR•S.MW] for 1
sec. to enter select memory write mode
.
•“!” indicator and the memory channel number blink.
e Push [SET•SKIP] once to select “bAnk.”
r Rotate the same band’s [DIAL] to select the desired bank
and bank channel.
• Push [ATT•PRIO] to toggle the bank or bank channel selection.
• Banks A to H, J to R, T, U, W and Y are available.
• Only vacant bank channel numbers will be displayed.
t Push and hold [VFO/MR•S.MW] for 1 sec. to program the
bank and exit select memory write mode
.
