Manual Icom IC-R2500 (page 19 of 80) (English)

12734

Zoom out

Zoom in

1/80

■ Tuning step selection

When using the tuning dial to change the frequency, or when

a scan function is activated, the frequency changes in incre-

ments determined by the set tuning step. This can be

changed if desired.

The following tuning step are available.

• 0.01 kHz (10 Hz) • 0.02 kHz (20 Hz) • 0.05 kHz (50 Hz)

• 0.1 kHz (100 Hz) • 0.5 kHz (500 Hz) • 1 kHz

• 2.5 kHz • 5 kHz • 6.25 kHz

• 8.33 kHz • 9 kHz • 10 kHz

• 12.5 kHz • 15 kHz • 20 kHz

• 25 kHz • 30 kHz • 50 kHz

• 100 kHz • 125 kHz • 150 kHz

• 200 kHz • 500 kHz • 1000 kHz (1 MHz)

q Push the desired band’s [MAIN] to select the main band.

• Push the same band’s [VFO/MR•S.MW] to select VFO mode, if

necessary.

wPush and hold [MHz•TS] for 1 sec. to enter tuning step se-

lect mode.

eRotate the same band’s [DIAL] to select the desired tun-

ing step.

rPush [MHz•TS] to exit tuning step select mode

• Or push any other keys for the same band or any of the shared

keys below the display to exit tuning step select mode.

[DIAL]

[MHz•TS]

SETTING A FREQUENCY

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R2500 in the language / languages: English as an attachment in your email.

The manual is 5,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-R2500 Manual

Product: