12728
9
Zoom out
Zoom in
Previous page
1/56
Next page
4
2
PANEL DESCRIPTION
2
y MONITOR•TONE•TONE SCAN KEY [MONI•T/T-SCAN]
Push to turn the monitor function ON and OFF. (p. 11)
Push and hold for 1 sec. to enter tone squelch selection
mode. (pgs. 31, 33)
•Tone squelch, pocket beep (CTCSS), tone squelch reverse
action, DTCS squelch, pocket beep (DTCS), DTCS squelch
reverse action or tone function OFF can be selected.
Push and hold for 1 sec. during tone squelch selection
mode to start the tone scan. (p. 34)
u NOISE BLANKER/AUTOMATIC GAIN CONTROL KEY
[NB•AGC]
Push to turn the NB (Noise Blanker) function ON and
OFF. (p. 12)
The noise blanker function cannot be used in FM/WFM modes.
Push and hold for 1 sec. to select the AGC (Automatic
Gain Control) function Slow and Fast. (p. 12)
While in FM or WFM mode, the AGC function is fixed
as Fast and AGC Slow cannot be selected.
i ATTENUATOR/PRIORITY KEY [ATT•PRIO]
Push to turn the ATT (Attenuator) function ON and OFF.
(p. 12)
Starts priority watch when pushed and held for 1 sec.
(p. 30)
o MEMORY/SKIP KEY [MR•SKIP]
Push to select the memory channel, memory bank or
weather channel* modes. (pgs. 16, 23, 44)
*Weather channels are available for USA/CANADA versions
only.
Push and hold for 1 sec. to turn the channel skip setting
ON and OFF for memory/frequency skip scan operation.
(p. 28)
!0 VFO/MHz TUNING•SCAN KEY [V/MHz•SCAN]
Selects and toggles VFO mode
and band selection,
1 MHz or 10 MHz tuning when pushed. (p. 9)
Starts scan when pushed and held for 1 sec. (p. 26)
• Cancels a scan when pushed during scan.
!1 TUNING DIAL [DIAL]
Selects the operating frequency (p. 9), memory channel
(p. 16), the setting of the set mode item (p. 35) and the
scanning direction (p. 26).
!2 MEMORY WRITE KEY [S.MW•MW] (pgs. 17, 18, 21)
Selects a memory channel for programming when
pushed.
Programs the selected memory channel when pushed
and held for 1 sec.
!3 POWER SWITCH FOR RECEIVER [POWER]
Turns the receiver power ON and OFF.
!3
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R1500 in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info