12724
80
Zoom out
Zoom in
Previous page
1/84
Next page
13
TROUBLESHOOTING
75
If your receiver seems to be malfunctioning, please check the
following points before sending it to a service center.
PROBLEM POSSIBLE CAUSE SOLUTION REF.
No power comes on. The installed batteries are exhausted.
(A slight current ows in the circuits even when
the power is OFF.)
The batteries have been installed in reverse po-
larity.
Charge the batteries or place new dry cell batter-
ies in the battery case.
(Remove the batteries if you will not be using the
receiver for a long time.)
Re-install the batteries in the correct orientation.
p. 8
p. 8
No audio is output. [VOL] is turned to the minimum position.
Earphone or headphone is connected.
The [SQL] is turned too far clockwise.
VSC function is activated.
Turn [VOL] to a suitable level.
Disconnect the earphone or headphone.
Turn the [SQL] counterclockwise.
Release the VSC function.
p. 10
p. 11
p. 38
Weak reception, excessive
distortion or too much
noise.
Not centered on the frequency.
Wrong receive mode is selected.
ATT function is activated.
The [SQL] (RF gain) is set too far clockwise (when
USB, LSB or CW is selected).
Batteries are nearly exhausted.
Set to the center frequency using a small tuning
step.
Select the correct receive mode.
Release the ATT function.
Turn the [SQL] (RF gain) counterclockwise.
Charge the batteries or place new dry cell batter-
ies in the battery case.
p. 13
p. 12
p. 65
p. 11
p. 8
Cannot tune frequency via
the keypad or [DIAL]
Lock function is ON. While pushing [FUNC], push [(EDIT)
LOCK] to turn
the lock function OFF.
p. 64
Cannot charge the installed
Ni-Cd batteries.
[CHARGE] is set to the OFF position. Set [CHARGE] to the ON position. p. 8
IC-R10.qxd 02.1.10 11:44 Page 75 (1,1)
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R10 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info