12720

Icom IC-Q7 Manual

7
Zoom out
Zoom in
Previous page
1/43
Next page
3
2
PANEL DESCRIPTION
y VOLUME CONTROL SWITCHES [VOLY]/[VOLZ]
➥Push to adjust the audio level. (p. 10)
➥Push [FUNC] + either switch to start a scan. (p. 16)
➥Push [FUNC] + either switch for 2 sec. to start a tone
scan. (p. 27)
u VFO/MEMORY SWITCH [V/M]
➥Toggles between VFO and memory modes. (p. 6)
➥Enters set mode when pushed for 2 sec. (p. 28)
➥Push [FUNC] + [V/M] to enter memory write mode. (p.
12)
➥Push [FUNC] + [V/M] for 2 sec. to write the operating fre-
quency into the selected memory channel in VFO mode.
(p. 13)
➥Push [FUNC] + [V/M] for 2 sec. to write the displayed fre-
quency into the VFO in memory mode. (p. 13)
i POWER SWITCH [POWER]
Push for 2 sec. to toggle the transceiver power ON and
OFF.
o MONITOR SWITCH [SQL] (p. 10)
➥Push and hold to temporarily open the squelch and
monitor the operating frequency. (default behaviour)
➥While pushing, rotate the tuning dial to set the squelch
threshold level.
➥Push [FUNC] + [SQL] to exchange the receive/transmit
frequency and duplex direction when the duplex function
is in use.
!0 CALL/LOCK SWITCH [CALL(LOCK)]
➥Selects the call channel. (p. 14)
➥Push [FUNC] + [CALL] to toggle the lock function ON
and OFF. (p. 8)
➥While in the memory channel programming condition,
push [FUNC] + [CALL] for 2 sec. to clear the contents.
(p. 14)
➥Generates a 1750 Hz tone for repeater access while
transmitting. (Europe and Italy versions only; p. 24)
!1 EXTERNAL SPEAKER AND MICROPHONE JACK
[SP/MIC]
Connects an optional speaker-microphone or headset via
an optional OPC-782
PLUG ADAPTER CABLE, if desired.
The internal microphone and speaker will not function
when the OPC-782 is connected. (See p. 38 for a list of
available options.)
!2 TUNING DIAL [DIAL]
➥Rotate [DIAL] to set operating frequencies, memory
channels, set mode contents, etc. (p. 7)
➥While pushing [SQL], sets the squelch level. (p. 10)
➥While pushing [FUNC], sets the operating frequency in
100 kHz, 1 MHz or 10 MHz steps in VFO mode. (pgs. 7,
29)
➥While pushing [FUNC], sets the operating channel in 10
channel steps in memory mode. (pgs. 7, 8)
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-Q7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-Q7 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info