Manual Icom IC-P7A (page 87 of 96) (English)

12704

Zoom out

Zoom in

1/96

MAINTENANCE

PROBLEM POSSIBLE CAUSE SOLUTION REF.

Desired set mode item

cannot be selected.

Programmed scan does

not start.

Memory or bank scan

does not start.

Charging indicator (BC-

164) lights red while

charging.

• “EXPAND” item is set to OFF.

• Program scan edges are not programmed.

• No or only one memory or bank channel is pro-

grammed.

• The temperature is too hot or too cold around the

charger (BC-164).

•Turn “EXPAND” item ON.

• Program a pair of scan edge channels.

• Program at least 2 memory or bank channels

•Place the charger within the speciﬁed temperature

range (+5°C to +35°C; +41°F to +95 °F), then

charge the battery pack.

p. 49

p. 36

pgs. 24,

p. 8

If the fuse blows or the charger stops functioning while oper-

ating with the optional CP-21LR, ﬁnd the source of the prob-

lem if possible, and replace the damaged fuse with a new,

rated one (FGB 2 A) as shown at right.

Fuse 2 A

■ Optional CP-21LR fuse replacement

Troubleshooting (continued)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-P7A in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-P7A Manual

Product: