670400
49
Zoom out
Zoom in
Previous page
1/80
Next page
42
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DSC Settings
On the “DSC Settings” screen, you can make settings on
the DSC call related items.
Position Input
See “Entering the position and time” on page 21 for details.
Individual ID
See “Entering an Individual ID” on page 19 for details.
Group ID
See “Entering a Group ID” on page 20 for details.
Auto ACK
The Auto ACK function automatically sends an
Acknowledgement call when the following calls are received.
Individual call (Default: Differs depending on the version)
Position Request call (Default: Manual)
Test call (Default: Auto)
Manual: Manually send an Acknowledgement call.
Auto: Automatically send an Acknowledgement call.
CH Auto Switch (Default: Accept)
Select whether or not to automatically switch to channel
16 or the specied channel, or select whether to switch or
ignore the call.
Accept: After receiving a DSC call, the transceiver remains
on the operating channel for 10 seconds. After
that, the transceiver automatically switches to the
channel that is specied on the DSC call.
Ignore: After receiving a DSC call, if you do not push the
software key below [ACPT] in 10 seconds, the
transceiver ignores the call, and then remains on
the current operating channel.
Manual: After receiving a DSC call, you can select whether
or not to accept the received DSC call.
DSC Switch (Default: On)
Select whether or not to receive and send DSC calls.
L You can send Distress calls despite of this setting.
On: Receives and sends DSC calls.
Off (TEMP): Does not receive or send DSC calls until you
turn OFF the transceiver.
Off: Does not receive or send DSC calls.
TIP: When “Auto” is set to the Individual call, the
Acknowledgement “Unable to Comply” is automatically sent when
the call is received.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M93DEuro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M93DEuro in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info