670399
71
Zoom out
Zoom in
Previous page
1/80
Next page
64
13
TROUBLESHOOTING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PROBLEM POSSIBLE CAUSE SOLUTION REF.
You cannot turn ON the
transceiver.
The Battery is exhausted or over
discharged.
• The Battery pack is not correctly attached.
Recharge the battery pack.
Correctly attach the battery pack.
p. 61
p. 2
Little or no sound
comes from the
speaker.
• The squelch level is set too high.
• The volume level is set too low.
The speaker has been exposed to water.
Water has entered to the speaker
microphone connector.
• Set the squelch to the threshold point.
• Set the volume to a suitable level.
Remove the water using the AquaQuake
function.
• Dry the speaker microphone connector.
p. 13
p. 15
You cannot transmit
Some channels are preset for low power
or receive only by regulations.
The battery is exhausted.
• The battery is overcharged.
• The output power is set to low.
Change channels.
Recharge the battery pack.
Conrm that the battery voltage is correct.
Push the software key below
to select
high power.
p. 14
p. 61
p. 5
Scan does not start Favorite channels are not set. Set the Favorite channels. p. 17
No beeps sound Key Beep is set to OFF. Turn ON the Key Beep on the
“Conguration” screen.
p. 57
You cannot send DSC
calls
MMSI (DSC self ID) code is not entered.
DSC Switch is set to OFF.
Enter the MMSI (DSC self ID) code.
Turn ON the DSC Switch in the Menu.
p. 9
p. 42
You cannot receive
GPS position data
The built-in GPS antenna is obstructed,
which interrupts the GPS signals from the
satellites.
Use the transceiver in a place where
nothing interrupts the satellite signal.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M93D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M93D in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info