670399
37
Zoom out
Zoom in
Previous page
1/80
Next page
30
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Sending a Test call
You should avoid testing calls on the exclusive DSC distress
channels and safety calling channels. When you cannot
avoid testing on a distress or safety channel, you should
indicate that these are test calls.
Normally the test call would require no further
communications between the two stations involved.
1. Push [◄] or [►] to display
.
2. Push the software key below
.
The “Compose Other” screen is displayed.
L You can also display the “Compose Other” screen by
selecting the “Compose Other” item on the Menu screen.
3. Push [] or [▼] to select “Test Call,” and then push
[ENT].
The “Test Call” screen is displayed.
4. Select the station to send the
Test call to.
L You can also select “Manual Input”
to manually enter the calling station.
5. Push the software key below [CALL] to send the Test call.
“Transmitting Test Call” is displayed.
L If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
6.
When you receive an Acknowledgement:
Alarm sounds.
• The screen to the right is displayed.
7. Push any software key to turn
OFF the alarm.
The Acknowledgement
information is displayed.
8. Push the software key below
[EXIT].
“Terminate the Procedure Are
you sure?” is displayed.
9. Push the software key below
[OK] to return to the operating
screen.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M93D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M93D in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info