670399
31
Zoom out
Zoom in
Previous page
1/80
Next page
24
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Distress Cancel call
If you have accidently made a Distress call, or made an
incorrect Distress call, send a Distress Cancel call to
cancel the call as soon as possible while waiting for an
Acknowledgement call, and report the purpose of the
cancellation.
1. While waiting for an Acknowledgement call, push the
software key below [CANCEL].
The screen below is displayed.
2. Push the software key below [CONT].
The Distress Cancel call is sent.
Channel 16 is automatically selected.
3. Hold down [PTT] to report the purpose of the
cancellation.
LYou can display the wording of the cancellation by pushing [▼].
4. After communicating, push the software key below
[FINISH].
• The screen to the right is displayed.
5. Push the software key below [OK] to finish the Distress
Cancel call.
• Returns to the operating screen.
D Distress call software key description
While waiting for an Acknowledgement:
[CANCEL]: Cancels the Distress call and enables you to
send a Cancel call. (See the right column)
[RESEND]: Enables you to resend the Distress call by
holding down [DISTRESS] again.
[PAUSE]: Pauses the countdown to resend the next
Distress call.
[INFO]: Displays the information of the Distress call
that you have sent.
After receiving an Acknowledgement:
[EXIT]: Closes the Distress operation, and returns to
the operating screen.
[HIST]: Displays the “Distress History.”
[INFO]: Displays the information of the received
Distress Acknowledgement.
NOTE (For USA and Export versions):
After sending a Distress call without position data
While waiting for an Acknowledgement, if valid position data is
received, the transceiver will automatically send a Distress call
again.
Even after exiting the DSC mode, if valid position data
is received within 20 minutes after receiving a Distress
Acknowledgement, the transceiver will automatically send a
Distress call again.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M93D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M93D in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info