522360

Icom IC-M92D Manual

25
Zoom out
Zoom in
Previous page
1/108
Next page
18
6
SCAN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Starting a scan ■
First, set the scan type (Priority or Normal scan), WX Alert func-
tion
and scan resume timer in the Menu screen. (pp. 84, 85)
Select the desired channel group. (p. q
12
)
Set the Favorite channels, as described to the left. w
Make sure the squelch is closed to start a scan. e
Push [SCAN] to start a Priority or Normal scan. r
• “SCAN 16” appears during a Priority scan; “SCAN” appears
during a Normal scan.
• When a signal is detected, the scan pauses until the signal
disappears, or resumes after pausing 5 seconds, depending
on the setting. (Channel 16 is still monitored during a Priority
scan.)
• Push [Y]/[Z] check the scanning Favorite channels, change
the scanning direction or manually resume the scan.
• A beep tone sounds and “16” blinks when a signal is received
on Channel 16 during a Priority scan.
To stop the scan, push [CLEAR] or repeat step tr.
Setting Favorite channels ■
For more effi cient scanning, add the desired channels as Fa-
vorite channels, or clear
“ ” for unwanted channels.
Channels that are not tagged will be skipped while scanning.
Favorite channels can be independently assigned to each
channel group (U.S.A., International and Canada*).
* For only the U.S.A. and EXP transceiver versions.
q
Select the desired channel group. (p.
12
)
w
Select the desired channel to be set as a Favorite channel.
Push [ e ] to set the displayed channel as a Favorite channel
.
• “ ” appears on the display.
To cancel the Favorite channel setting, repeat step re.
• “ ” disappears.
Clearing (or setting) all tagged channels ✓
Hold down [] for 3 seconds (until a long beep changes to
2 short beeps) to clear all Favorite channel settings in the
selected channel group.
• Repeat above procedure to set all channels as Favorite channels.
Scan starts. When a signal is received.
Push
[SCAN]
[Example]: Starting a Normal scan.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M92D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M92D in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info