Manual Icom IC-M90E (page 24 of 40) (English)

12692

Zoom out

Zoom in

1/40

SET MODE

D Auto power save function “PS”

The auto power save function reduces current drain by deac-

tivating the receiver circuit for preset intervals.

• ON : The power save function is turned ON. The power save func-

tion will activate when no signal is received, and no operation

is performed for 5 sec.

• OFF: The power save function is turned OFF.

D Self check function “SC”

The self check function checks the transceiver conditions by

itself, and informs you in case a problem is found. Self check

automatically and quickly runs through its diagnostic steps

each time the radio is turned ON. Afterwards, the radio

switches to normal operation mode.

• Temperature : Outside of –35°C to +73°C (approx.)

• Connected battery voltage

When error messages as shown below are displayed, see

troubleshooting for advice. (p. 28)

Push

Power save ON (default) Power save OFF

Push

Self check OFF (default) Self check ON

Temperature error Battery voltage error

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M90E in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-M90E Manual

Product: