12686
20
Zoom out
Zoom in
Previous page
1/40
Next page
14
5
SCAN OPERATION
Setting tag channels
For more efficient scanning, add desired channels as tag
channels or clear tag channels for unwanted channels. Non-
tag channels will be skipped during scanning. Tag channels
can be assigned to each channel group
(USA, INT, CAN) inde-
pendently.
q Select the desired channel group
(USA, INT, CAN) by push-
ing [CH/WX
U/I/C/L] for 1 sec., if desired.
w Select the desired channel to set as a tag channel.
e Push both [Y] and [Z] for 1 sec. to set the displayed chan-
nel as a tag channel.
•“TAG appears in the function display.
r To cancel the tag channel setting, push both [Y] and [Z]
for 1 sec.
•“TAG disappears.
Clearing all tag channels in the selected channel group
While pushing and holding both [Y] and [Z], turn power ON
to clear all tag channels in the channel group.
Starting a scan
Set the weather alert function, priority scan function, scan re-
sume timer and auto scan function in advance, using SET
mode. (pgs. 18, 19)
q Select the desired channel group (USA, CAN, INT) by
pushing [CH/WX
U/I/C/L] for 1 sec., if desired.
When the weather alert function is in use, select the desired
weather channel with [CH/WXU/I/C/L] and [Y]/[Z].
w Push [SCNDUAL] to start priority or normal scan.
•“SCAN blinks in the function display.
•“16 appears during priority scan.
When a signal is received, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to SET mode
setting. (Channel 16 is still monitored during priority scan.)
Push [Y]/[Z] to check the scanning tag channels, to change the
scanning direction or resume the scan manually.
e To stop the scan, push [SCNDUAL].
•“SCAN disappears.
Pushing [PTT], [169] or [CH/WXU/I/C/L] also stops the scan.
Push
Scan starts.
Push
to stop the scan.
Scan pauses when receiving
a signal and audio is emitted.
DUAL
DUAL
[Example]: Starting a normal scan.
IC-M88-2.qxd 02.11.22 3:24 PM Page 14 (1,1)
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M88 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info