12686
16
Zoom out
Zoom in
Previous page
1/40
Next page
10
4
BASIC OPERATION
q Rotate [VOL] clockwise to turn power ON.
w Use the squelch function to mute any audio noise if
necessary. After pushing the [SQL] for 1 sec., the squelch
function is cut off until [SQL] is released. (default)
e Push [SQL] for 1 sec. (see the SET mode on p. 19), and
rotate volume to set the audio output level.
r Push [Y]/[Z] to select the desired channel.
- When receiving a signal, “” appears and audio is emitted
from the speaker.
- Further adjustment of [VOL] may be necessary at this point.
t Push [H/LLOCK] to select the output power if necessary.
- LOW appears when low power is selected; MID appears
when middle power is selected; no indication when high power is
selected.
- Choose low power to conserve battery power, choose high
power for longer distance communications.
- Some channels are for low power only.
y Push and hold [PTT] to transmit, then speak into the
microphone.
- TX
appears.
- Channel 70 cannot be used for transmission (for GMDSS use).
u Release [PTT] to receive.
Receiving and transmitting
CAUTION: Transmitting without an antenna may
damage the transceiver.
IMPORTANT: To maximize the readability of your transmit-
ted signal, pause a few sec. after pushing [PTT], hold the
microphone 5 to 10 cm (2 to 4 inches) from your mouth and
speak at a normal voice level.
NOTE: The transceiver has a power save function to con-
serve the battery power and it cannot be turned OFF. The
power save function activates automatically when no sig-
nal is received for 5 sec.
For U.S.A version: To prevent accidental prolonged trans-
mission, etc., the IC-M88 has a time-out timer function. This
timer cuts a transmission OFF after 5 min. of continuous
transmission.
IC-M88-2.qxd 02.11.22 3:24 PM Page 10 (1,1)
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M88 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info