670378

Icom IC-M85 Manual

36
Zoom out
Zoom in
Previous page
1/40
Next page
31
13
INFORMATION
■ FCC information
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
■ Information FCC
Cet équipement a été testé et reconnu conforme aux
limites xées pour un appareil numérique de classe A,
conformément au point 15 de la réglementation FCC.
Ces limites sont dénies de façon à fournir une protection
raisonnable contre le brouillage préjudiciable lorsque cet
appareil est utilisé dans un environnement commercial. Cet
équipement génère, utilise et peut émettre un rayonnement
de fréquence radio. S'il n'a pas été installé conformément
aux instructions, il peut par ailleurs créer des interférences
perturbant les communications radio. L'utilisation de cet
appareil dans une zone résidentielle peut provoquer un
brouillage préjudiciable, auquel cas l'utilisateur sera tenu de
corriger la situation à ses frais.
CAUTION: Changes or modications to this transceiver,
not expressly approved by Icom Inc., could void
your authority to operate this transceiver under FCC
regulations.
MISE EN GARDE: Tout changement ou modication,
non expressément approuvé par Icom Inc., peut annuler
l'autorisation de l'utilisateur à utiliser cet appareil
conformément à la réglementation FCC.
■ Firmware version identication
You can identify your transceiver’s rmware version.
1. Turn OFF the transceiver.
2. While holding down [
], turn ON the transceiver.
• The rmware version is displayed.
L Example: “ ” is displayed, when the firmware is
Version 1.001.
… 36 …


Need help? Post your question in this forum.

Forumrules
1

Forum

icom-ic-m85

Reset search

  • Set transmit and shows RED after releasing PTT the status indicator shows Orange and channel blink for 5 sec and stop blinking of Channel. Transmission ok but no reception. Whats may be the problem Submitted on 25-7-2022 at 08:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M85 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info