Manual Icom IC-M85 (page 17 of 40) (English)

670378

Zoom out

Zoom in

1/40

BASIC OPERATION

New2001

D Changing channel group

Channel Groups are preset into your transceiver. You can

select the Channel Group between USA, International,

Canadian, and ATIS depending on the transceiver version.

z Hold down [U/I/C/L]*

or [CH]*

for 1 second to change the

channel group.

For the USA, Chinese, and Export versions.

For the European, UK, German, and Australian versions.

D Weather channels

(Except the European, UK, and German versions.)

The transceiver has 10 preset Weather channels. You can

use these channels to monitor broadcasts from the National

Oceanographic and Atmospheric Administration (NOAA).

The transceiver automatically detects a Weather Alert tone

on the selected Weather channel, or while scanning.

1. Push [CH/WX] or [CH]*

to enter the Weather channel

selection mode.

For the Australian version.

2. Rotate [DIAL] to select a Weather channel.

 Setting the Weather Alert

1. Turn OFF the transceiver.

2. While holding down [SQL], Turn ON the transceiver to

enter the Set mode.

3. Push [SQL] to select the Weather Alert item.

• “ ” is displayed.

4. Rotate [DIAL] to turn

ON the Weather Alert.

• “ ” is displayed.

5. Push [16/C] to exit the Set

mode.

 Weather channel list

Version

Preset Channel Group

USA INT CAN ATIS

USA

  

 

European



German

 

Australian

 

Export (Other)

  

Chinese

  

Channel Frequency (MHz) Channel Frequency (MHz)

1 162.550 6 162.500

2 162.400 7 162.525

3 162.475 8 161.650

4 162.425 9 161.775

5 162.450 10 163.275

Set transmit and shows RED after releasing PTT the status indicator shows Orange and channel blink for 5 sec and stop blinking of Channel. Transmission ok but no reception. Whats may be the problem Submitted on 25-7-2022 at 08:14
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M85 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-M85 Manual

Product: