12680
66
Zoom out
Zoom in
Previous page
1/78
Next page
58
13
CONNECTION AND INSTALLATION
2001 NEW 2001 NEW
Using the optional MB-75
The optional MB-75 ush mount is available for mount-
ing the controller and speaker to a at surface such as
an instrument panel.
CAUTION: KEEP the transceiver and microphone
at least 1 meter away from your ships magnetic
navigation compass.
q Using the template on the page 67 for the remote
controller (RC-25), and page 69 for the speaker
(SP-24), carefully cut a hole into the instrument
panel (or wherever you plan to mount the controller
or the speaker).
w Slide the controller or the speaker through the hole
as shown below.
e Attach the supplied 2 screws (M5×8) and spacers
on either side of the controller or speaker.
r Attach the clamps on either side of the controller
or speaker.
Make sure that the clamps align parallel to the body.
t Tighten the end screws on the clamps (rotate
clockwise) so that the clamps press rmly against
the inside of the instrument control panel.
y Tighten the locking nuts (rotate counterclockwise)
so that the controller or speaker is securely
mounted in position as below.
u Connect the control cable then return the instru-
ment control panel to its original place.
For your reference
When ush mounting the controller and speaker side
by side as below, screw and spacer attachment for
the facing side will be impossible with the instructions
above.
In this case, refer to the instructions at right for refer-
ence.
q Carefully cut the holes with at least 25 mm (1 in)
space between them into the instrument panel.
w Install the speaker as instructed above, rst.
e Attach the screw and spacer on the speaker side
of the controller.
r Slide the controller through the hole as shown
below.
t Attach the screw and spacer on the other side of
the controller, then attach the clamps and follow
steps t to u as above.
IC-M802_USA.qxd 02.7.9 10:59 Page 58
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info