12680
47
Zoom out
Zoom in
Previous page
1/78
Next page
2001 NEW
39
8
WHEN RECEIVING A CALL
8
Distress call
q When receiving a distress call, an emergency
alarm sounds and the display below appears.
w Push [CANCEL/CALL] to stop the alarm, if desired.
One distress call sequence is sent 5 times repeatedly
within approx. 30 sec. The emergency alarm sounds at
each reception.
e Push [ENT] to set the transceiver to the distress
phone frequency, then monitor the communication
from the coast station to the ship in distress.
r Select the received distress call memory channel
to check the position of the ship in distress.
Push [FREQ/CH] then [RX
CLAR
] to select RX
memory screen.
Select Distress with [CH] then push
[ENT].
Push [ENT] again.
The received distress call memory is displayed at
the top line with * symbol.
When the ship is close to you, communication should
be monitored continuously.
The trafc frequency is monitored even when the mem-
ory contents is displayed.
******
RX
memory
*******
-------
Distress
-------
Distress
ID:123456789
Undesignated
Position:Lat
34
34'N
Lon134
34'W
UTC
12:34
Traffic:J3E
TX
2182.0kHz
RX
2182.0kHz
RX
Freq:TX
2187.5kHz
RX
2187.5kHz
DEL
OKCancel
RX
J3E
<
Traffic
>
Lat
34
34'N
Lon135
34'E
12:34
SP
Exit
GPS
************************
*
Distress
*
*
123456789
*
************************
TrafficExit
q When receiving a distress relay call, an emergency
alarm sounds and the display below appears.
w Push [CANCEL/CALL] to stop the alarm, if desired.
e Push [ENT] to set the transceiver to the distress
phone frequency, then monitor the communication
from the coast station to the ship in distress.
r Select the received distress call memory channel
to check the position of the ship in distress.
Push [FREQ/CH] then [RX
CLAR
] to select RX
memory screen.
Select Others with [CH] then push [ENT].
Push [ENT] again.
The received distress relay call memory (DTRS
RLY) is displayed at the top line with * symbol.
When the ship is close to you, communication should
be monitored continuously.
The trafc frequency is monitored even when the mem-
ory contents is displayed.
******
RX
memory
*******
-----
Distress
RLY
-----
From:001234567
Distress
ID:123456789
To
all
ships
Undesignated
Position:Lat
34
34'N
Lon134
34'W
UTC
12:34
Traffic:J3E
TX
2182.0kHz
RX
2182.0kHz
RX
Freq:TX
2187.5kHz
RX
2187.5kHz
DEL
OKCancel
RX
J3E
<
Traffic
>
Lat
34
34'N
Lon135
34'E
12:34
SP
Exit
GPS
************************
*
Distress
RLY
*
*
001234567
*
************************
TrafficExit
Distress relay call
IC-M802_USA.qxd 02.7.9 10:58 Page 39
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info