12680
27
Zoom out
Zoom in
Previous page
1/78
Next page
2001 NEW
19
7
CALL PROCEDURE
7
DD
Regular distress call
Transmit a distress call after selecting Distress
in the DSC menu.
NEVER USE THE DISTRESS CALL WHEN YOUR
SHIP IS NOT IN AN EMERGENCY. DISTRESS
CALLS CAN BE USED ONLY WHEN IMMEDIATE
HELP IS NEEDED.
q Push [DSC] to select DSC watch mode.
w Push [MODE set] to select the DSC menu.
e Rotate [CH] to select Distress, then push
[ENT].
r Rotate [CH] to select the desired nature then push
[ENT].
t Verify the position and UTC time data, then push
[ENT].
When no position and time data is applied to [GPS],
your position and UTC time should be input in this step.
y Rotate [CH] to select the desired distress fre-
quency, then push [ENT].
After pushing [ENT], return to the DSC menu as shown
in step q.
u Lift up the distress switch cover, push [DISTRESS]
for 5 sec. to transmit the distress call.
The distress call is transmitted on the emergency fre-
quency selected in step y.
i After transmitting the call, the transceiver is set to
the phone emergency frequency automatically.
The DSC receiver circuit is still working to receive an
acknowledgement call on the previous frequency.
The distress call transmission and acknowledgement
reception are performed on the all distress frequencies
(2187.5, 4207.5, 6312.0, 8414.5, 12577.0 and
16804.5 kHz) in sequence when Single;six
frequency is selected in step y.
o When receiving an acknowledgement, push [CAN-
CEL/CALL] to stop the alarm then reply to the con-
nected station via the transceivers microphone.
The acknowledgement is memorized into the RX mem-
ory channel. (p. 38)
RX
J3E
<
Wait
for
ACK
>
Lat
34
34'N
Lon135
34'E
12:34
SP
GPS
Exit
*******
Distress
*******
--------
Attempt
-------
Single;six
frequency
Single;
2187.5kHz
Single;
4207.5kHz
Single;
6312.0kHz
Single;
8414.5kHz
Single;12577.0kHz
Single;16804.5kHz
OKSEL
Ç
*******
Distress
*******
---
Position
&
time
----
Latitude
Longitude
UTC
34
34'N
135
34'E
12:34
OKNull
*******
Distress
*******
--------
Nature
--------
Undesignated
Fire,Explosion
Flooding
Collision
Grounding
Capsizing
Sinking
Disable
adrift
Abandoning
ship
Piracy
attack
Man
overboard
EPIRB
emission
Ç
OKSEL
*******
DSC
MENU
*******
--------
Select
--------
Position
Individual
Group
All
ships
Position
REQ
Distress
Test
RX
memory
TX
memory
Set
up
Exit
Ç
OKSEL
[MODE SET][ENT][DSC]
[FREQ/CH][CH] [F][CANCEL/CALL]
IC-M802_USA.qxd 02.7.9 10:58 Page 19
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info