12680
24
Zoom out
Zoom in
Previous page
1/78
Next page
16
6
DSC PREPARATION
2001 NEW
Position and time programming
q While pushing and holding [MODE
SET
] push
[POWER] to enter initial set mode.
Turn the power OFF in advance.
w Rotate [GRP] to select the GPS DISPLAY then
rotate [CH] to select the desired position indication
type from simple and detail.
e Rotate [GRP] to select the OFFSET TIME then
rotate [CH] to set the time difference between local
and the UTC times within 12 to +12 hours in
10 minute steps.
r Turn the power OFF once, then ON again to exit
quick set mode.
When a position and the UTC time data
(NMEA0183 ver. 3.01 format) is applied to [GPS],
the following steps are not necessary.
t Push [DSC] to select DSC watch mode.
y Push [MODE
SET
] to enter the DSC menu.
DSC menu is displayed as below.
u Rotate [CH] to select Position, then push
[ENT].
i Enter your position and the UTC time via the key-
pad, then push [ENT]
Push [3
SCAN
] for the East, [9
H
i] for the West, [6
RF
-
G
]
for the North and [7
L
o] for the South setting.
Degrees and minutes digits can only be entered even
when DETAIL is selected for the position indication
in step w the seconds digits show 0 only.
Rotate [CH] to move the cursor.
o Push [ENT] to program the position and time.
Return to the DSC MENU indication as in step u.
!0 Push [MODE
SET
] to exit the DSC menu.
Rotate [CH] to select Exit then push [ENT] also
exits set mode.
•“MNL appears instead of GPS.
*******
Position
*******
---
Position
&
time
----
Latitude
Longitude
UTC
34
34'N
135
34'E
12:34
OKNull
*******
DSC
MENU
*******
--------
Select
--------
Position
Individual
Group
All
ships
Position
REQ
Distress
Ç
OKSEL
***
SET
MODE
***
ITEM SEL
***
SET
MODE
***
SIMPLE
DETAIL
ÇÇ
ITEM SEL
[POWER][MODE SET]
When no position and the UTC (Universal Time Coor-
dinated) time data in NMEA0183 ver. 3.01 format, such
as from a GPS receiver, etc., is applied to [GPS] con-
nector, your position and the UTC time should be input
for DSC operation.
IMPORTANT!
The manually programmed position and the UTC
time settings will be cleared once the power is
turned OFF. They are never renewed during the
voyage when the position is set manually.
IC-M802_USA.qxd 02.7.9 10:58 Page 16
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info