12680
20
Zoom out
Zoom in
Previous page
1/78
Next page
DD
Clarity control
Voice signals received from other stations may be dif-
cult to receive. This may sometimes happen if a sta-
tion is transmitting slightly off frequency. In such cases,
you can compensate by using the clarity control.
q Push [F] then [RX
CLAR
] to switch the function ON
and OFF.
•“CLAR and shifting value with direction appear.
w Rotate [CH] to improve the audio readability.
Adjustable between ±150 Hz in 10 Hz steps.
[RX CLAR][CH] [F]
Functions for receive (continued)
CW operation
12
4
RECEIVE AND TRANSMIT
2001 NEW
The transceiver has the following CW keying features
selectable in set mode as described on p. 51.
Full break-in (receiving is possible while transmitting)
Semi break-in
(automatic transmission with keying)
OFF
(manual transmission with microphones [PTT], or
grounding the SEND line of [ACC] connector is
necessary before keying)
q Connect a CW keyer or an external electronic
keyer to the [ACC] socket as shown at right.
w Select the desired channel to operate CW mode.
e If the selected channel is not in A1A mode, push
[MODE
SET
] several times to select A1A.
r Operate the CW keyer to transmit a CW signal.
CW key connection
1
2
3
4
5
6
7
8
To pin 2
PTT*
*manual transmission switch for break-in
OFF setting.
To pin 1
To pin 3
DD
Tuner through function
In the combination with IC-M802 and optional AT-140
(or AH-3), the tuner through function can be used.
By bypassing the tuner unit, the receiver gain in par-
ticular frequency band may be improved depending
on your antenna element length.
While TUNE is displayed, push [F] then
[TUNE
THRU
] to tuner through function ON.
•“THRU appears instead of TUNE indicator.
Push [TUNE
THRU
] to turn the function OFF.
[TUNE THRU] [F]
IC-M802_USA.qxd 02.7.9 10:58 Page 12
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info