12680
17
Zoom out
Zoom in
Previous page
1/78
Next page
3
3
9
SELECTING A CHANNEL/FREQUENCY
DD
Using the keypad
Direct channel selection via the keypad is available
for quick channel selection.
q Enter the desired channel number via the keypad.
Pushing [CE] clears input digits and retrieves the chan-
nel.
A user channel is selected when channel 1160 is
input (max. number may be optionally restricted).
An ITU SSB channel is selected when channel num-
bers higher than 401 are input.
When selecting an ITU simplex channel, push [0
DIM
]
three times to input “– (dash).
(e.g. When selecting the channel 4-1;
push [4
SP
××
], [0
DIM
], [0
DIM
], [0
DIM
] then [1
NB
].)
w Push [ENT] to select the channel.
[EXAMPLE]: Selecting channel 158
LH
CH
---GPS---
Lat
45
59'N
Lon134
44'E
16:23
RX J3E
CH
---GPS---
Lat
45
59'N
Lon134
44'E
16:23
RX J3E
LH
CH
---GPS---
Lat
45
59'N
Lon134
44'E
16:23
RX J3E
LH
CH
---GPS---
Lat
45
59'N
RX J3E
SIMP
DD
Using scan function
The transceiver has automatic channel or frequency
change capability (scan function). There are 3 types
of scan functions available to suit your needs.
Channel scan and channel resume scan increase
channels within a 20 channel range, such as Ch 1 to
Ch 20, Ch 141 to Ch 160, etc., in user channels; or
all channels in the group of ITU channels.
Programmed scan scans frequencies within the fre-
quency range between user channels 159 and 160.
Scan type selection is available in initial set mode.
See p. 50 for the selection.
SCAN OPERATION
q Rotate [GRP] and [CH], or use the keypad to se-
lect your desired channel group.
This operation is not necessary for programmed scan.
w Push [F] then [2
SQL
] to turn OFF the squelch
function, if programmed scan is selected.
e Push [F] then [3
SCAN
] to start the scan.
r To stop the scan, repeat step e again.
[CH] rotation or pushing some other switches also
stops the scan.
Channel scan/Channel resume scan
Ch 1
Ch 2 Ch 3
Ch 4
Ch 20
When resume OFF;
scan does not pause even
if a signal is received.
When resume ON;
scan pauses for 10 sec.,
then resumes, or resumes
after 2 sec. from when the
signal disappears.
Programmed scan
Ch 159 Ch 160
Scans the frequency range
between the programmed
frequencies on channels
159 and 160.
Scans fast when squelch is
closed and slowly when
squelch is open.
IC-M802_USA.qxd 02.7.9 10:58 Page 9
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M802 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info