12678
18
Zoom out
Zoom in
Previous page
1/80
Next page
4
10
RECEIVE AND TRANSMIT
2001 NEW
Basic voice transmit and receive
q Check the following in advance.
Handset or microphone is connected.
No “SQL” indication.
If “SQL” appears, push [F] then [2
SQL
] to turn the
squelch OFF.
No “ ” indication.
If “ ” appears, push [F] then [4
SP
××
] to activate
the speaker.
The clarity function is not activated.
If the clarity function is activated, push [F] then
[RX
CLAR
] to turn the function OFF.
w Rotate [GRP] and [CH] to select the desired chan-
nel to be received.
When receiving a signal, the S-meter shows the signal
strength.
e Adjust [VOL] to the desired audio level when re-
ceiving a signal.
r Push [MODE
SET
] to select the desired operating
mode.
t Push [TUNE
THRU
] to tune the antenna tuner, if con-
nected.
Skip this operation when the “AUTO TUNE” is set to ON
in initial set mode (p. 43).
y To transmit on the channel, push and hold the PTT
switch on the handset or microphone.
•“TUNE” blinks for 1 to 2 sec. for the first transmission
on a channel when the automatic tuning function is acti-
vated.
u Speak into the handset or microphone at your nor-
mal voice level.
The RF meter shows the output power according to your
voice level.
If “SWR” appears, check your antenna system.
i Release the PTT switch to return to receive.
[RX CLAR]Microphone
connector
[4
SP
×
] [2 SQL]
[F]
SP
Function for transmit
DD
Transmit frequency check
When “DUP” appears in the display such as for a
ship-to-ship channel, the transmit frequency differs
from the receive frequency.
In such cases, the transmit frequency should be mon-
itored before transmitting to prevent interference to
other stations.
Push [F] then push and hold [TX
TXF
] to monitor
the transmit frequency.
•“TX” blinks and the display shows the transmit frequency.
[TX TXF][F]
IC-M801E_0.qxd 05.12.2 16:32 Page 10
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M801E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M801E in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info