12678
15
Zoom out
Zoom in
Previous page
1/80
Next page
7
2
PANEL DESCRIPTION
2
q RECEIVE INDICATOR
RX” appears when signals are received or the
squelch is open.
w TUNE INDICATOR
TUNE” blinks while tuning, if an optional external
antenna tuner is connected. (p. 10)
•“TUNE” appears after tuning is completed with AT-141.
•“THRU” appears when the tuner through function is ac-
tivated.
•“SWR” appears when the antenna SWR worsens during
transmit, depending on the transmit output power. If it
appears, check your antenna system.
e
OPERATING MODE INDICATOR
Shows the selected operating mode.
•“J3E,” “USB,” “H3E,” “AM,” “LSB,” “J2B,” “AFS,”
F1B,” “FSK,” “A1A” or “CW” appears depending on
operating mode and setting.
r SIMPLEX/DUPLEX INDICATOR
SIMP” appears when a simplex channel is se-
lected.
DUP” appears when a duplex channel is selected.
t FUNCTION INDICATOR
” appears when a secondary function can be ac-
cessed.
y CLARITY INDICATOR (p. 12)
CLAR” appears when the clarity function is acti-
vated and shows shifting frequency in “Hz.”
u SPEAKER OFF INDICATOR (p. 10)
” appears when the speaker output is turned
OFF.
i AGC OFF INDICATOR (p. 11)
” appears when the AGC OFF function is
turned ON.
o POSITION/UTC TIME INDICATOR (p. 15)
Shows position and/or UTC (or local) time. When
an NMEA0183 ver. 3.01 data is applied to [GPS],
the indication is up dated automatically.
When no NMEA data is applied, the position and UTC
time must be set in advance.
•“GPS” appears when an NMEA0183 ver. 3.01 data is
applied to [GPS], “MNL” appears when the position is
manually set.
•“UTC” appears when the offset time has not been pro-
grammed. (No “UTC” indication when offset time is pro-
grammed and shows local time.)
!0 CHANNEL NUMBER INDICATION
Shows the selected channel number.
!1 S/ANTENNA CURRENT INDICATOR
Shows relative driving antenna current levels dur-
ing transmit and receiving signal strength during re-
ceive.
!2 NOISE BLANKER INDICATOR (p. 11)
NB” appears when the noise blanker function is ac-
tivated.
!3 SQUELCH INDICATOR (p. 11)
SQL” appears when the squelch is ON.
!4 TRANSMIT INDICATOR
TX” appears during transmit.
TX” blinks while monitoring a transmit frequency.
(p. 10)
!5 CHANNEL NAME/RECEIVE FREQUENCY
READOUT
Shows the programmed channel names.
Shows receive frequency when no channel name
is programmed, or during frequency indication.
During DSC watch mode, displays “DSC WATCH.”
!6 TRANSMIT FREQUENCY READOUT
Shows transmit frequency.
!7 OPERATING GUIDE INDICATION
During DSC watch mode operation, shows several
types of guidance, according to the selected condi-
tion.
!8 SCANNING FREQUENCY READOUT
During DSC watch mode operation, shows the pro-
grammed scan frequency.
Decimal points blink.
!9 MMSI CODE INDICATION
During DSC watch mode operation, shows the pro-
grammed MMSI code.
y IF FILTER WIDTH INDICATOR
Shows the selected IF filter passband width during
e-mail operation mode.
AGC
SP
2001 NEW
IC-M801E_0.qxd 05.12.2 16:32 Page 7
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M801E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M801E in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info