12678
6
Zoom out
Zoom in
Previous page
1/80
Next page
III
QUICK REFERENCE
2001 NEW 2001 NEW
Basic voice transmission and reception
DD
Receiving a signal
q Select the desired channel via [GRP] and [CH], or
keypad.
Turn ON/OFF the squelch function or adjust the
squelch level as desired.
w When a signal is received, “RX” indicator appears
and audio is output from the connected speaker.
Rotating [VOL] to adjust the audio output level at this
moment is recommended.
S-meter shows the received signal strength.
e Use the following functions, if desired:
Noise blanker
Push [F] then [1
NB
] to turn the noise blanker
ON and OFF.
•“NB” appears when the noise blanker is activated.
See page 42 for the noise blanker level adjustment.
AGC (Automatic Gain Control) OFF function
Push [F] then [5
AGC
×
] to turn the AGC OFF
function ON and OFF.
” appears when the AGC-OFF function is
activated (deactivating AGC).
RF gain level
Push [F], [6
RF
-
G
] to enter the RF gain adjust-
ment mode, then rotate [CH] to adjust the gain.
Adjust the gain within 0 (low sensitivity) to 9 (maxi-
mum sensitivity) range.
Push [MODE
SET
] to exit the adjustment mode.
Clarity
Push [F], [RX
CLAR
] to switch the clarity func-
tion ON and OFF, then rotate [CH] for critical
tuning.
[5 AGC
×
]
[1
NB]
[F] [RX CLAR]
[6 RF-G]
AGC
DD
Transmitting in voice
q Select the desired channel via [GRP] and [CH], or
keypad.
w Push [F], then push and hold [TX
TXF
] for a while
to monitor the transmit frequency of the selected
channel.
The transmit frequency is displayed and “TX” blinks.
When the channel is busy, wait until it becomes clear,
or change the channel.
e When the optional AT-141 is connected, push
[TUNE
THRU
] to start manual tuning.
•“TUNE” appears when the antenna is tuned.
•“TUNE” blinks when a tuning error has occurred.
Automatic tuning function is also available.
r Push and hold [PTT] on the handset or micro-
phone to transmit.
•“TX” appears.
If “SWR” appears during transmit, check your antenna
system.
t Speak into the handset or microphone at your nor-
mal voice level.
y Release [PTT] to return to receive.
•“TX” disappears.
[TUNE THRU]
[TX TXF][GRP] [CH] [F]
IC-M801E_0.qxd 05.12.2 16:32 Page III
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M801E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M801E in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info